■ 4-1/2位11000数据点
■ 大屏幕数码显示和背光，即使在光线较弱的位置也能有效读数，增强了可读性
■ 测量高达1000V 交流和直流电压信号，最大精度0.28%
■ 交直流电压测量最高分辨率达到0.01mV,交直流电流最大可测到11A
■ 交流真有效值测量，可准确进行各种交流信号测量，交直流电流最小分辨率0.01uA
■ 通过柔性电流钳头与数字表相结合，可测量高达3000A交流电流
■ 可选配多种钳形探头用于测量交直流电流和微/漏电流(选件)
■ 电阻测量可达到110MΩ，最小分辨率0.01Ω
■ 频率测量(多个灵敏度可选)
■ 内置温度计，无需携带更多工具选配K型热电偶温度传感器可测温度：-50℃—1000℃
■ 通断和二极管测试，通断测试时候，发出蜂鸣音，LED灯亮
■ 数据锁定用于观察和记录测量数据
■ 量程锁定可以准确读取数据
■ 自动量程的相对值测量
■ 110mF的电容测量量程，用于元器件和马达电容的测量
■ 具有防止电流端子误插入保护盖,当使用电流测量以外的功能时, mA/uA或A测定端子内插入表笔线时会显示InErr,同时蜂鸣器报警
■ 标配镀金表笔，防腐、防接触不良，提高测量的精度
■ 软件支持8个通道的数据采集分析功能
■ 光电USB接口（选配）连接PC，通过软件分析测量数据，操作界面实时显示图形，使您能轻松检查测量值的变化
■ 数据读取可设定间隔单位为秒，最短读取间隔为0.2-0.3秒
■ 多窗口界面，各通道分别各窗口显示
■ 允许预先设定自动读取
■ 为保存测定数据, 可连接电脑将数据储存到硬盘,也可连接到安卓终端记录到内存,方便统计和分析数据.
■ 用于确保安全的大容量保险丝（30KA）
■ 自动省电模式（30分钟）可取消，延长了电池寿命
■ 抽样率：4次/秒
■ 频带宽度：45- 100Hz（110mV的范围内），45〜500Hz的（1.1V范围），45- 1KHz（11V范围及以上，ACA）
■ 安全规格：IEC61010- 1（EN61010- 1）,CAT.III 600V最大/ CAT.II DC1000V(最大)

Specifications:‌

• ‌4½-digit display with 11000 counts‌

• ‌Large-screen digital display with backlight‌, ensuring readability even in low-light conditions.

• ‌Measures up to 1000V AC/DC voltage‌ with a maximum accuracy of ‌0.28%‌.

• ‌AC/DC voltage resolution up to 0.01mV‌; ‌AC/DC current measurement up to 11A‌.

• ‌True RMS AC measurement‌ for accurate readings of various AC waveforms. ‌AC/DC current resolution down to 0.01μA‌.

• ‌Flexible current clamp‌ (combined with the meter) measures ‌AC current up to 3000A‌.

• ‌Optional clamp probes‌ for measuring AC/DC current and micro/leakage current (accessories).

• ‌Resistance measurement up to 110MΩ‌ with a ‌minimum resolution of 0.01Ω‌.

• ‌Frequency measurement‌ (multiple sensitivity options).

• ‌Built-in thermometer‌; supports ‌K-type thermocouple‌ for temperature measurement ‌(-50°C to 1000°C)‌.

• ‌Continuity and diode test‌: Audible buzzer and LED indicator for continuity detection.

• ‌Data hold function‌ to freeze readings for observation/recording.

• ‌Range lock‌ for precise data capture.

• ‌Auto-ranging with relative value measurement‌.

• ‌Capacitance measurement up to 110mF‌ for components and motor capacitors.

• ‌Anti-misinsertion protection‌: Displays "InErr" and triggers an alarm if test leads are inserted into current terminals during non-current measurements.

• ‌Gold-plated test leads‌ (included) for corrosion resistance, stable contact, and improved accuracy.

• ‌8-channel data acquisition and analysis‌ via software.

• ‌Optical USB interface (optional)‌ for PC connectivity, enabling real-time data graphing and analysis.

• ‌Adjustable data sampling interval‌ (minimum ‌0.2–0.3 seconds‌).

• ‌Multi-window interface‌ for simultaneous display of multiple channels.

• ‌Pre-programmable auto-read function‌.

• ‌Data storage‌: Save measurements to PC hard drive or Android devices via USB for analysis.

• ‌High-capacity safety fuse (30kA)‌.

• ‌Auto power-saving mode‌ (30 minutes, can be disabled) to extend battery life.

• ‌Sampling rate‌: 4 times/second.

• ‌Frequency bandwidth‌:

• ‌45–100Hz‌ (110mV range),

• ‌45–500Hz‌ (1.1V range),

• ‌45–1kHz‌ (11V range and above for AC).

• ‌Safety compliance‌: IEC 61010-1 (EN 61010-1), ‌CAT III 600V max / CAT II 1000V DC max‌.